Study tools

MSL, AGL and the 400-foot rule

Charts give airspace and obstacles in feet above sea level (MSL); Part 107 limits you in feet above the ground (AGL). Most altitude questions come down to one subtraction and two rules. Work them out in the calculator, then drill on fresh scenarios.

Last reviewed

Calculator

Ceiling over floor, as printed: 70/20, 100/SFC or 100/+40.

Result

  • Airspace

    Class B figures are MSL. Its floor is 2,000 ft MSL, which is 300 ft above this ground (2,000 − 1,700). At 350 ft AGL (2,050 ft MSL) you are inside Class B, so you need prior ATC authorization (14 CFR 107.41), however low you fly.

    Source: Chart User's Guide, VFR terms p. 16 (Class B and C altitudes in MSL); 14 CFR 107.41 (operation in certain airspace)

The rules, worked

1. AGL = MSL − ground elevation

A readout of 1,600 ft MSL over ground at 1,250 ft MSL is 350 ft AGL. AC 107-2A describes exactly this: subtract the control station's MSL elevation from the aircraft's reported MSL altitude.

Source: AC 107-2A 5.12 (determining altitude: subtract the control station elevation)

2. 400 ft AGL, or 400 ft above a structure you stay close to

The limit is 400 ft AGL unless the aircraft is within a 400-foot radius of a structure and no higher than 400 ft above its top. A tower charted 1549 (299) stands 299 ft tall on ground at 1,250 ft. Within a 400-foot radius of a structure you may fly up to 400 ft above its top: 299 + 400 = 699 ft AGL. That is 1,949 ft MSL.

Source: Chart User's Guide, VFR terms p. 11 (obstruction heights, MSL and AGL); 14 CFR 107.51(b) (altitude limit and the structure exception)

3. Inside Class B, C, D or a Class E surface area? Get ATC authorization

Chart figures for Class B, C and D are MSL, so convert before you compare. A Class D box [29] over an airport at 800 ft: Class D figures are MSL. It runs from the surface up to 2,900 ft MSL (2,100 ft above this ground). At 200 ft AGL (1,000 ft MSL) you are inside Class D, so you need prior ATC authorization (14 CFR 107.41), however low you fly.

Source: Chart User's Guide, sectional legend p. 27 (Class D in hundreds of feet MSL; Class E floors); Chart User's Guide, VFR terms p. 16 (Class D ceilings); AIM 3-2-5 (Class D airspace); 14 CFR 107.41 (operation in certain airspace)

The trap is a Class B shelf over high ground. Sector 70/20 over ground at 1,700 ft: Class B figures are MSL. Its floor is 2,000 ft MSL, which is 300 ft above this ground (2,000 − 1,700). At 350 ft AGL (2,050 ft MSL) you are inside Class B, so you need prior ATC authorization (14 CFR 107.41), however low you fly. At 250 ft AGL instead: Class B figures are MSL. Its floor is 2,000 ft MSL, which is 300 ft above this ground (2,000 − 1,700). At 250 ft AGL (1,950 ft MSL) you are below the floor, outside Class B at this spot.

Source: Chart User's Guide, VFR terms p. 16 (Class B and C altitudes in MSL); 14 CFR 107.41 (operation in certain airspace)

Class E that begins at 700 or 1,200 ft AGL (the shaded areas) needs no authorization; 14 CFR 107.41 names only the Class E surface area designated for an airport.

Source: 14 CFR 107.41 (operation in certain airspace); AIM 3-2-6 (Class E transition areas at 700 or 1,200 ft AGL); Remote Pilot Study Guide ch. 2 (Class G airspace)

Not sure what a sector block or a ceiling box says? The sectional chart notation decoder reads every chart notation used here.

Find your own gaps first

Airspace and regulations are two areas of five. The free Muster Check covers all of them in the proportions the real test uses, scores each one, and shows the explanation and cited source for every question.

Take the free Muster Check

Sources

  • 14 CFR Part 107 (eCFR): § 107.51(b) altitude limit and § 107.41 Operation in certain airspace.
  • Advisory Circular 107-2A, section 5.12 (operating limitations; determining altitude).
  • FAA Aeronautical Chart User's Guide: VFR Terms and Symbols (obstructions, Class B, C and D altitudes) and the sectional chart symbology (Class D and Class E).
  • Aeronautical Information Manual 3-2-5 (Class D) and 3-2-6 (Class E).
  • Remote Pilot (sUAS) Study Guide (FAA-G-8082-22), chapter 2: Class E and Class G airspace.

Independent study tool. Not affiliated with or endorsed by the FAA. The FAA is named above as the publisher of public-domain documents, not as an endorser. This is a study aid; check current charts and authorizations before you fly.